FWA 4630

Wheel alignment: FWA 4630

3D wheel alignment is considerably faster than CCD systems.

Marginal Column

Download box

The following downloads can be activated under the following links:

Bosch Open Innovation platform

Bosch Open Innovation platform

Information on leasing campaigns in 2012

Information on leasing campaigns in 2012

Content
  • Product info

    Measuring options:

    • Total toe (front axle + rear axle)
    • Partial toe (front axle + rear axle)
    • Camber
    • Wheel offset (front axle + rear axle)
    • Driving angle between axles
    • After-run
    • Kingpin angle
    • Relative steering angle Only for standard alignment
    • After-run correction range
    • Lateral offset left/right
    • Wheel track differential
    • Axle offset (front axle + rear axle)
    • Steering wheel angle max. Steering wheel angle not possible for all vehicles
    • Wheel base differential

    The check is carried out on cars and light trucks with a weight of up to 3.5 t and a wheel base of 180 cm to 340 cm (wheel alignment is possible on vehicles up to 430 cm using larger boards at the rear, which are available as special accessories.

    Use in automobile workshops and tire service centers with a high throughput of wheel alignments.

     

    • OEM recommendations worldwide
    • Vehicle specs database: as standard with over 150 vehicle manufacturers (approx. 40,000 data sets) including adjustment diagrams – directly from the vehicle manufacturer
    • Maximum operational efficiency thanks to a choice of three measurement routines: program-guided, quick alignment, random access for testing of individual values
    • Device components are designed to be extremely easy to use.
    • ISO certification of testing station through calibration in the field.
    • Simple, intuitive operation, including for workshop staff without specialist knowledge of wheel alignment and the simple runout compensation means it can be performed by just one person.
    • Software: maximum efficiency thanks to a choice of three measurement routines: program-guided, quick alignment or random access for testing of individual values.
    • Extremely short wheel alignment time: seven minutes to printout of results. As the image capture frequency is very high, measurements can be taken almost in real time.

    The steering wheel angle for the after-run angle, kingpin angle, and relative steering angle is determined using cameras. Total steering wheel angle measurement depending on the distance up to 50° performed using cameras.

    • The mobile device is easy to stow in vehicles and quick to use (short setup times) and can be employed out and about at different testing stations.
    • Robust trolley for the most important components: Control system computer, TFT monitor, color printer, all recording devices practically stowed
    • Simple and flexible user software
     

    Part number: 1 690 700 002

     
  • Technical data

    Technical data: FWA 4630
    Power supply 110 - 240 V AC (10 A)
    Voltage 10 A
    Frequency 50/60 Hz
    Power 500 W
    Trolley with recording device (W x H x D) 1520 x 1180 x 770 mm
    Trolley without recording device (W x H x D) 1520 x 880 x 770 mm
    Recording device (W x H x D) 150 x 370 x 650 mm
    Weight recording device 9.3 kg
    Weight 110 kg

     
  • Accessories

    • Standard aluminum mechanical turntables without aluminum filler pieces (1 unit) (1 690 702 157)
    • Rubber cover for aluminum turntable (1 unit) (1 690 402 001)
    • Drive-on ramp set for two aluminum turntables (1 690 701 052)
    • Magnetic holder (1 690 701 051)
    • Universal quick-action clamp 10"-21" (1 unit) (1 690 311 001)
    • Multi-quick clamp – clamping range 14" to 24" (1 unit), quantity required: 4 (1 690 501 250)
    • Attachment bolts 100 mm (12 units) (1 690 302 008)
    • Distance bolts for Mercedes-Benz and BMW for the multi-quick clamp (set: 5 units per clamp) (1 690 401 019)
    • Lift adapter swivel foot, short (1 690 701 047)
    • Lift adapter swivel foot, long (1 690 701 020)
    • Mine adaption for recording device (1 690 701 027)
    • Step-bracket set (2 units) (1 690 701 045)
    • 3D standard instrument panel (quantity required: 4) (1 690 711 005)
    • Keyboard (English) (1 687 022 368)
    • Data transmission/charging station (1 693 770 003)
    • Brake pedal lock (1 690 401 006)
    • Steering wheel lock (1 690 401 007)
    • Ballast bag (5kg) (1 693 740 001)
     
  • Scope of delivery

    Part number: 1 690 700 002

    • 2 recording devices
    • Switch
    • Hub
    • Test box
    • Trolley
    • 19" monitor
    • Printer
    • Program
    • Specified data (cars and vans)
    • Dongle (USB)
    • Licenses
    • Standard boards (4 units)
    • Steering wheel lock
    • Brake pedal lock